Moto Obscura Blog RSS
Cracked or broken rearset mounts? No problem. Here's how to weld a Superhawk's cast aluminum parts.
A couple weekends ago I got the opportunity to give SCCA Rallycross a try with the North East Ohio SCCA Chapter. My race car of choice: a 2013 Fiat 500 Sport.
This tutorial shows you how to install our 124 Spider seat adapters for Procar aftermarket seats. Brackets can be found here.
This is a simple tutorial on how to install our KYB monotube gas rear shock absorber upgrade kit. Total install time should take less than one hour.
I’m going to tell you straight up that replacing the alternator is probably the most frustrating thing I’ve had to do on my 2013 Fiat 500. I’d like to think that if there was an easier way, I would have found it, but for now, this is the best write up I could come up with.